The Corsair iCUE LINK LX140-R RGB Dual Fan Starter Kit combines reverse-flow fan blades for unobstructed intake aesthetics with a single-cable daisy-chain ecosystem. This two-fan pack provides a complete foundation for building a high-performance, cable-managed cooling loop in modern PC chassis.

Reverse-flow aesthetics for pristine intakes

Standard fans expose their structural struts and wiring when mounted as intakes at the bottom or side of a case. The LX140-R features a reverse-blade design that pushes air into the chassis while keeping the clean, unobstructed face of the fan visible. Each 140 x 140 x 25 mm fan is equipped with 18 individually addressable RGB LEDs arranged in a dual-loop configuration, ensuring even illumination across the black frame and blades.

Substantial static pressure for restrictive cases

Built to force air through dense obstructions, these fans generate up to 4.22 mmH2O of static pressure at maximum speed. Combined with a peak airflow of 90.6 CFM, they are highly capable of drawing fresh air through restrictive mesh panels, dust filters, or thick liquid cooling radiators. The PWM control allows precise tuning across a wide 350 to 2000 RPM range, giving builders the flexibility to balance thermal performance with acoustics.

Magnetic Dome bearings with Zero RPM mode

The LX140-R utilises Corsair’s Magnetic Dome bearings to reduce friction, resulting in a 50,000-hour MTBF rating and a quiet acoustic profile that scales from 10 dBA up to 38.3 dBA under full load. For systems that prioritise silence during light workloads, the fans support Zero RPM mode, allowing them to stop spinning entirely when system temperatures drop below a set threshold.

Everything needed to start an iCUE LINK loop

The iCUE LINK ecosystem replaces traditional ARGB and PWM fan cables with a single, unified connector that daisy-chains from one component to the next. This starter kit provides the hardware required to begin a streamlined loop:

• iCUE LINK System Hub: The central controller for routing power and lighting data to the daisy-chained fans.
• Connection Cables: The required wiring to link the fans to the hub and motherboard.
• QuikTurn Screws: Specially threaded fasteners designed to secure the fans to a chassis or radiator with minimal effort.